Amongst many system errors, the “boot device not found” error is one of the most common issues that is faced by the users across the globe. This error occurs unexpectedly without giving you a single chance to detect the cause behind it. You can easily fix the issue when your HP computer won’t boot by following a set of measures. There are many remedial solutions for this error and when this error occurs you see the following messages appearing on-screen:
- Boot device not found please install an operating system on your hard disk.
- Boot device not found.
- HP boot device not found 3f0 error.
- No boot table device found- insert boot disk and press any key.
When boot device not found error occurs?
Boot device not found please install an operating system on your hard disk occurs when the hard disk does not support the system boot process. During the process to boot in the Laptop, the Operating system loads in the RAM. To start the process, the setup process will start and the BIOS will take the charge. However, you need to understand that when the hard drive is not accessible then the HP computer won’t boot will pop up on-screen.
What are the possible causes of boot device not found an error?
If you can identify the cause of the boot device not found then you can take some suitable cause of action. The possible causes are:
- Damaged hard drive.
- Corrupted hard drive.
- Connection issues in hard drive
- Incorrect boot sequence in BIOS.
- MBR or the boot section is damaged.
- Malware and malicious attack.
- Connection issues in hard drive.
How to fix hp boot device not found 3f0 error on Windows 10?
- First of all, you need to perform a Hard reset.
- Just restore the Bios default settings.
- Now, you need to reset the Hard drive.
- Wait for a while till the boot device not found is not fixed.
What happens if all methods fail to fix boot device not found on your operating system?
- It just depends upon what exact cause of the error and then the fix can probably help you. However, it is very possible that none of the fixes can help you. In this case, we recommend you to try to consult the data recovery professional who is experts in fixing the “boot device not found” error. There can be many serious issues behind the error to occur:
- Bad sections in the hard drive in use.
- MBR is damaged.
- Internal or Physical damage.
In a conclusive viewpoint:
The boot device not found can make your computer system to work as a malfunctioned machine. We hope that this article will help you to fix the error. However, you can use the HP Scan Doctor driver or HP Assistant tool to go through the root cause behind this issue to occur. You can also visit the official page www.hp.com/go/techcenter/startup of HP.
Frequently answered questions:
What does error code 3f0 mean?
The error code 3f0 mean is a common type of error that usually occurs on HP models. Moreover, the error code occurs when the computer is unable to find a boot device. For this, you need to check and make sure the hard drive that the primary boot device in BIOS that the connection to the motherboard is intact and secured.
What causes the boot device not found?
The main cause behind the boot device not found is caused by the faulty hard disk or the damaged account. The issue of the boot device not found is occurred by a faulty hard disk or the conversion between the GPT and MBR. There are causes such as copying disk partition and more. There can be other vulnerable causes behind this error to occur that you can find out on the computer.
How can I get my HP laptop to boot up?
With HP hard drive error can repair mostly every error. All you need to do is turn on the computer and tap on the f10 button to boot into the BIOS setup and then tap on the “Hard Disk Test” option. After this, you need to restore the system using the Microsoft System Restore. Then turn on the computer and tap on F8, after this, tap on the “Boot info safe mode” tab.
How do I bypass disk boot failure?
To bypass you need to restart the computer and open the BIOS. After this, go to the “Boot” tab and change the order to place the hard disk in the first place. Just save the settings and restart the computer to check whether the disk boot failure still persists or not on your computer and PC.
How do I fix Windows 10 no boot device?
For this, you need to restart the computer and tap on the “Esc” option to enter the BIOS interface. Just tap on the right arrow on your keyboard till the Boot tab is accessible. After this, move the “Hard drive” in the boot order list by tapping on the + or -. In the end, just tap on the F10 button to save the changes, and then you have to restart the computer.
How do I open the boot menu on an HP?
You need to turn on or restart the computer. You will see a blank screen just tap on the F10 key to access the BIOS settings menu. Once you have opened the BIOS window just go to the boot settings. Now, you have to follow the on-screen instructions to change the boot order. This will help to open the boot menu on HP.